Induction Loop Kits
make a great
TV Listening System
● Hear clear TV sound sent directly to your ears!
● Small-area hearing loop for home, office, reception,
conference room etc.
● Zero maintenance, always ready - nothing to recharge!
● The sound is truly amazing!
Choose from three Induction Loop Systems
-
Chair
Loop Kit - chair-pad loop
(personal induction loop
system - via
chair loop pad)
- an ingenious, simple
solution for one hearing impaired telecoil user to enjoy
TV or stereo system audio (at their own listening level - without
disturbing others) from the comfort of a favorite chair.
more...
-
Room Loop Kit -
with room loop wire
(small-area
induction loop system - one or more T-coil users)
- a great solution enabling any
number of hearing impaired telecoil users to enjoy TV, stereo system
sound or any audio input from any location within the looped area.
more...
-
Car Seat Loop Kit
- with chair-pad loop
(personal induction loop system - via car seat loop pad)
- an interesting adaptation of the Chair Home Loop Pad Kit allowing a hearing impaired user to listen to a
traveling companion via a lapel microphone.
more...
Chair
Loop Kit - with chair-pad loop
● localized, personal induction loop system
● with chair loop pad that connects to the Univox DLS-50
-
Chair Loop Kit makes an amazing
TV Listening System.
-
Chair Loop Kit is a simple yet
versatile solution for one hearing impaired telecoil user to enjoy
TV, stereo system or any audio input, even
telephone audio, (at their own listening level - without
disturbing others) from the comfort of a favorite chair.
-
There's no receiver or headset required - this system provides
wireless reception via the hearing aid or CI (cochlear implant) telecoil.
-
Simple "do
it yourself" installation in minutes - just plug it in!
1. Connect the audio output from the TV or stereo system to the
Univox DLS-50
induction loop amplifier.
2. Place the thin, chair loop pad under the cushion of a favorite chair
and connect the loop pad connector cord to the Univox DLS-50. (The chair
can be up to 30 feet from the Univox DLS-50 amplifier. Run the connector
cord under a carpet or cord protector.)
3. Connect the Univox DLS-50 power adapter to a wall outlet and adjust the
volume control - you're done!
-
Chair Loop Kit is so compact and easy to install that it can be
moved from one location to another and is therefore considered
'semi-portable'.
(Please Note: - The Chair Loop Kit induction field is
designed to be local to the looped chair. If sound (via telecoil) is
desired from multiple locations within a room, please
consider installing a Room Loop Kit.)
order information...
[back to top]
Room
Loop Kit - with room loop wire
● whole room, multi-user induction loop system
● with 100 ft wire for D.I.Y. loop installation
-
Room Loop Kit makes an amazing TV Listening System.
-
Room Loop Kit is a great solution that enables any
number of hearing impaired telecoil users to enjoy TV, stereo system
or any audio input, even telephone audio, (at
their own listening level - without disturbing others) from any location within the looped area.
-
There's no receiver or headset required - this system provides
wireless reception via the hearing aid or CI (cochlear implant) telecoil.
-
"Do
it yourself" installation
1. Connect the audio output from the TV or stereo system to the
Univox DLS-50
induction loop amplifier.
2. Create a looped area (max. approx. 400 sq. ft.) by installing up to
80 feet of thin,
insulated, copper wire
around the perimeter of the room . The wire may be
installed underneath carpet or
attached to the baseboard - it can even be installed
underneath the floor by attaching it to basement ceiling joists.
The two ends of the wire loop are easily attached to the terminals on the
Univox 2A amplifier. Leader wires, between the loop and Univox 2A, should
be twisted together.
3. Connect the Univox DLS-50 power adapter to a wall outlet and adjust the
volume control - you're done!
-
Because the Room Loop Kit requires loop-wire installation, this is likely to be a more
permanent installation than the Chair Loop Kit, although
temporary installations can be made by taping the wire to the floor or
carpet.
order information...
[back to top]
Car
Seat Loop Kit - with chair-pad loop
● localized, personal induction loop system
● with seat loop pad, microphone and car power adapter
-
Car Seat Loop Kit is an interesting adaptation of the Chair
Loop Kit
enabling a hearing impaired user to listen to a
traveling companion via a lapel microphone.
-
There's no receiver or headset required - this system provides
wireless reception via the hearing aid or CI (cochlear implant) telecoil.
-
"Do
it yourself" installation
1. Connect the supplied lapel microphone to the Univox DLS induction
loop amplifier and give the lapel microphone to a traveling companion.
2. Place the thin, car seat loop pad on the car seat and connect the
loop pad connector cord to the Univox DLS-50 amplifier.
3. Connect the supplied, Univox DLS-50 car power adapter to the car's
cigarette lighter socket and adjust the volume control - you're done!
-
This system is so small and easy to install that it may be
moved from one car to another and is therefore considered 'semi-portable'.
-
Please Note: TecEar does not recommend
the use of T-coil in both ears while driving a vehicle. The resultant
reduction of perceived environmental sounds such as car horns or emergency
sirens could be hazardous to the driver and other road users and maybe
illegal in some cities and states. Please drive safely.
order information...
[back to top]
Options
|
Note:
UniVox DLS-50 replaces
UniVox 2a (retired)
Chair Loop Kit
-
with chair pad loop, amplifier,
connector cords and power adapter.
Univox DLS-50 Amplifier
The
Univox DLS-50 amplifier creates a signal from TV, audio, microphone or telephone input that
feeds into a room wire loop or a chair loop pad; the resultant induction field is
picked up by the T-coil (telecoil) receiver in the user's hearing aid or CI.
Univox DLS-50
Induction
Loop
Amplifier features:
●
Small, thin amplifier
(less than 1" high)
●
Advanced, automatic gain control (AGC)
● Volume
control & volume level indicator
●
Bass & Treble tone
controls (for increased clarity)
●
3 inputs:
●
Iine
●
Iine/mic.
●
mic. with input control
●
3 outputs:
●
chair loop pad
●
room wire loop
●
headphone
2-year manufacturer warranty
Customer Comment -
Got my room induction loop system. I
haven’t heard TV this clearly in 30 years or more. It works GREAT! Thank you
so much.
Why haven’t more hearing impaired people heard of this technology?
D. D. - Kentucky
more comments...
Downloads:
|
